Industrialtelephone.co.uk

Industry Supply, Industrial Supply

Gai-Tronic Toughphone VOIP Phone
GAI-Tronics’ SIP compatible VoIP Handset Surface-mount Telephones are designed to provide direct point-to-point communications between personnel throughout a facility over an existing LAN. The VoIP telephones are intended for connection to a 10/100 BaseT Ethernet SIP network and operate using power-over-Ethernet or an external power source. VoIP telephones are compatible with Cisco's UCM Version 5.0 or newer. Housed in a 1/4-inch thick, sand-cast aluminum, weatherproof enclosure and coated with an exterior polyurethane finish.
  • Braille Metallic Keypad (optional)
  • Cast Aluminum Enclosure with Polyurethane Finish
  • Compatible with TMA (Telephone Management Application) Software
  • Conformal-coated PCBA
  • Embedded Browser (No Additional Interface Required) for Web Page Configuration
  • FCC &
  • IC Certified, UL60950 Listed
  • Handset with Noise-cancelling Microphone and 15-inch Armored Cord
  • Hearing Aid Compatible
  • Indoor and Outdoor Use
  • NEMA 3R Weatherproof Rating
  • Non-moveable Hookswitch
  • Power Over Ethernet or External 24-48 V dc Supply
  • Real-time Email Fault Reporting
  • RJ45 LAN or WAN Direct Connection
  • SIP compatible
  • Surface-mount
  • Volume Control Pushbutton (Front Panel)


The VoIP telephone features real-time alarm reporting that enables system supervisors to monitor the phone’s activity and address callers’ needs or maintenance issues immediately. GAI-Tronics’ Handset VoIP Telephones’ features make them ideal for use in any application requiring point-to-point communications or telephone system access.

 

VOIP Tough Phone

Embedded web pages held within the VoIP Handset Telephone can be accessed over a network using a browser such as (Internet Explorer®) to view, monitor, and change settings within the unit. GAI-Tronics’ Hands-free Telephones are housed within corrosion-resistant enclosures and are designed to provide high levels of unit integrity, delivering a robust solution for virtually any IP communication application.

In addition to each unit’s real-time email reporting capability, all telephones can be monitored via a central PC utilizing our TMA (Telephone Management Application) software. TMA will systematically poll each telephone on a pre-programmed schedule (daily, weekly, etc.) and provide a single report with a variety of available information pertaining to call activity and fault reporting of the following:

  • Configuration error
  • Cold reset (caused by power failure)
  • Warm reset (caused by internal command or error)
  • Keypad error / stuck buttons
  • Microphone / Speaker circuit fault
  • Handset off-hook (if so equipped)
  • Register fail


back to Weatherproof VOIP Telephones
Industry Supply, Industrial Supply Explosion Proof Products